cph3114 / cph3214 no.6394-1/5 applications relay drivers, lamp drivers, motor drivers, flash. features adoption of mbit processes. large current capacitance. low collector-to-emitter saturation voltage. high-speed switching. ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). high allowable power dissipation. ( ) : cph3114 specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit collector-to-base voltage v cbo (--)15 v collector-to-emitter voltage v ceo (--)15 v emitter-to-base voltage v ebo (--)5 v collector current i c (--)1.5 a collector current (pulse) i cp (--)3 a base current i b (--)300 ma collector dissipation p c mounted on a ceramic board (600mm 2 ? 0.8mm) 0.9 mw junction temperature tj 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit collector cutoff current i cbo v cb =(--)12v, i e =0 (--)0.1 a emitter cutoff current i ebo v eb =(--)4v, i c =0 (--)0.1 a dc current gain h fe v ce =(--)2v, i c =(--)100ma 200 560 marking : cph3114 : ap, cph3214 : cp continued on next page. ordering number : enn6394a 62504 ts im tb-00000306 / 70500 ts (koto) ta-2786 cph3114 / cph3214 pnp / npn epitaxial planar silicon transistors dc / dc converter applications sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft?s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein.
cph3114 / cph3214 no.6394-2/5 continued from preceding page. ratings parameter symbol conditions min typ max unit gain-bandwideth product f t v ce =(--)2v, i c =(--)300ma (350) mhz 450 mhz output capacitance cob v cb =(--)10v, f=1mhz (17)9 pf i c =(--)750ma, i b =(--)15ma (--120) (--180) mv collector-to-emitter saturation voltage v ce (sat) 130 200 mv i c =(--)1.5ma, i b =(--)30ma (--210) (--320) mv 240 360 mv base-to-emitter saturation voltage v be (sat) i c =(--)750ma, i b =(--)15ma (--)0.85 (--)1.2 v collector-to-base breakdown voltage v (br)cbo i c =(--)10 a, i e =0 (--)15 v collector-to-emitter breakdown voltage v (br)ceo i c =(--)1ma, r be = (--)15 v emitter-to-base breakdown voltage v (br)ebo i e =(--)10 a, i c =0 (--)5 v turn-on time t on see specified test circuit. (50)40 ns storage time t stg see specified test circuit. (90) ns 180 ns fall time t f see specified test circuit. (15)20 ns package dimensions switching time test circuit unit : mm 2150a --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --1.4 --1.6 --1.8 --2.0 0 i c -- v ce 0 --0.2 --0.1 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 0.2 0.1 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 collector-to-emitter voltage, v ce -- v collector current, i c -- a 2.0 1.0 0 i c -- v ce 0 i b =0 collector-to-emitter voltage, v ce -- v collector current, i c -- a 1.8 1.6 1.4 1.2 0.8 0.6 0.4 0.2 it01691 it01692 cph3114 --50ma --30ma --10ma --40ma --20ma --2ma --4ma --6ma --8ma i b =0 cph3214 50ma 40ma 30ma 20ma 10ma 8ma 6ma 4ma 2ma 1 : base 2 : emitter 3 : collector sanyo : cph3 0.05 0.9 0.7 0.2 1.6 0.6 0.6 1.9 1 2 3 2.8 0.2 2.9 0.15 0.4 + + 50 input output v r r b r l v cc =5v 220 f 470 f v be = --5v pw=20 s i b1 i b2 dc 1% (for pnp, the polarity is reversed.) 20i b1 = --20i b2 = i c =750ma
cph3114 / cph3214 no.6394-3/5 1.0 100 5 7 10 3 2 5 7 3 2 23 57 23 2 57 0.01 1.0 0.1 3 10 1000 5 7 100 3 2 5 7 3 2 collector current, i c -- a h fe -- i c dc current gain, h fe 1000 7 5 3 2 10 23 57 --0.01 --1.0 -- 0 . 1 23 57 23 100 7 5 3 2 cph3114 v ce = --2v --25 c ta=75 c collector current, i c -- a f t -- i c gain-bandwidth product, f t -- mhz 23 57 23 2 57 --0.01 --1.0 -- 0 . 1 3 10 1000 5 7 100 3 2 5 7 3 2 collector current, i c -- a h fe -- i c dc current gain, h fe 1000 7 5 3 2 10 23 57 0.01 1.0 0.1 23 57 23 100 7 5 3 2 cph3214 v ce =2v --25 c 25 c ta=75 c collector current, i c -- a f t -- i c gain-bandwidth product, f t -- mhz cph3114 v ce = --2v cph3214 v ce =2v it01695 it01697 it01696 it01698 collector-to-base voltage, v cb -- v cob -- v cb output capacitance, cob -- pf 23 57 --1.0 --10 23 23 57 1.0 10 23 1.0 100 5 7 10 3 2 5 7 3 2 collector-to-base voltage, v cb -- v cob -- v cb output capacitance, cob -- pf cph3214 f=1mhz it01699 it01700 cph3114 f=1mhz 25 c -- 1 . 0 -- 0 . 5 -- 0 . 9 -- 0 . 8 -- 0 . 7 -- 0 . 6 -- 0 . 4 -- 0 . 3 -- 0 . 2 -- 0 . 1 0 1.0 0.5 0.9 0.8 0.7 0.6 0.4 0.3 0.2 0.1 0 base-to-emitter voltage, v be -- v i c -- v be collector current, i c -- a 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 cph3114 v ce = --2v --25 c 25 c ta=75 c base-to-emitter voltage, v be -- v i c -- v be collector current, i c -- a 0 0.2 0.4 0.6 0.8 1.2 1.0 --25 c cph3214 v ce =2v ta=75 c 25 c it01693 it01694
cph3114 / cph3214 no.6394-4/5 23 57 --0.01 --1.0 -- 0 . 1 23 57 23 --1000 7 5 3 2 --100 7 5 3 2 -- 1 0 7 5 23 57 0.01 1.0 0.1 23 57 23 1000 7 5 3 2 100 7 5 3 2 10 7 5 collector current, i c -- a v ce (sat) -- i c cph3214 i c / i b =50 75 c ta= --25 c collector current, i c -- a v be (sat) -- i c 10 7 5 3 2 0.1 23 57 0.01 1.0 0.1 23 57 23 1.0 7 5 3 2 cph3214 i c / i b =50 ta= --25 c 25 c 75 c collector current, i c -- a v ce (sat) -- i c cph3114 i c / i b =50 75 c 25 c ta= --25 c collector current, i c -- a v be (sat) -- i c -- 1 0 7 5 3 2 -- 0 . 1 23 57 --0.01 --1.0 -- 0 . 1 23 57 23 23 57 0.1 10 1.0 23 57 23 -- 1 . 0 7 5 3 2 cph3114 i c / i b =50 ta= --25 c 75 c it01703 it01705 it01704 it01706 25 c ambient temperature, ta -- c p c -- ta collector dissipation, p c -- w 1.4 0 0.2 0.4 0.6 0.8 0.9 1.0 1.2 0 20 40 60 80 100 120 140 160 collector-to-emitter voltage, v ce -- v a s o collector current, i c -- a 2 10 2 3 5 7 1.0 2 3 5 7 0.1 3 5 7 0.01 dc operation 100ms 10ms 500 s 100 s i cp =3a i c =1.5a it01707 it01708 1ms cph3114 / cph3214 cph3114 / cph3214 25 c 23 57 0.01 1.0 0.1 23 57 23 1000 7 5 3 2 100 7 5 3 2 10 7 5 collector current, i c -- a v ce (sat) -- i c collector current, i c -- a v ce (sat) -- i c 23 57 --0.01 --1.0 -- 0 . 1 23 57 23 --1000 7 5 3 2 --100 7 5 3 2 -- 1 0 7 5 cph3114 i c / i b =20 --25 c 25 c ta=75 c it01701 it01702 cph3214 i c / i b =20 -- 2 5 c ta=75 c 25 c collector-to-emitter saturation voltage, v ce (sat) -- mv collector-to-emitter saturation voltage, v ce (sat) -- mv base-to-emitter saturation voltage, v be (sat) -- v base-to-emitter saturation voltage, v be (sat) -- v collector-to-emitter saturation voltage, v ce (sat) -- mv collector-to-emitter saturation voltage, v ce (sat) -- mv mounted on a ceramic board (600mm 2 ? 0.8mm) ta=25 c single pulse mounted on a ceramic board (600mm 2 ? 0.8mm) for pnp, minus sign is omitted.
cph3114 / cph3214 no.6394-5/5 ps specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer?s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer?s products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of june, 2004. specifications and information herein are subject to change without notice.
|
